FACTORY – DIRECT / WORKBENCH MANUFACTURER
Table Model A-107P-LT-TILT – Adjustable Height Tilt Top Light Table
– Ergonomic Adjustable Height Table
Features
- Durable Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
- Welded Tubular Steel Frame Connections
- Adjustable Leveling Feet. Casters available as option – See below…
- See our Cleanroom Workbench Section for Electropolished Stainless Steel Tables…
- Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More.
This model is part of the RDM Industrial Workbenches standard models.
This Unit shown with Hand Crank Hydraulic Tilt & Electric Lift…
Standard Ergonomic Tilt Top Light Table Features…
- Mobile Ergonomic Table – Height Adjustable with Hydraulic Lift System
- Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
- 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
- Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
- Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
- Hand Crank is mounted below work surface (Front or Side)
- Switch for Optional Electric Motor Unit can be positioned anywhere on the unit…
- UL Approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
- CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
- – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
- 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
- Hydraulic Height Adjustment w/ Electric Motor or Hand Crank
- Tilt Top is available in the following configurations:
- Manual Adjustment Support Brackets (50-100 lb max. load recommended)
- Hydraulic Tilt with Manual Hand Crank (Standard 250 lb capacity up to 500 lb)
- Hydraulic Tilt with Electric Motor (Same weight capacity as above…)
- Industrial-Duty Total-Locking Casters (Pivot & Wheel)
- Other Styles Available – See Our Adjustable Height Tables page…
- Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
- Also See Our Laboratory Tables page…
- Standard & Custom Sizes:
- We are the manufacturer…
- Feel free to specify your custom dimension requirements or choose from the following…
- “A” – WIDTH (Right-to-Left) 30″, 36″, 48″, 60″, 72″, & 96″
- Minimum Top/Unit Widths (to Accommodate Hydraulic System):
- Electric Motor Hydraulic System:
- 6″ Lift – 28″ Min. Width
- 8″ Lift – 30″ Min. Width
- 10″ Lift – 32″ Min. Width
- 12″ Lift – 34″ Min. Width
- 16″ Lift – 38″ Min. Width
- Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
- Hand Crank folds beneath work surface…
- 6″ Lift – 15″ Min. Width or Depth
- 8″ Lift – 17″ Min. Width or Depth
- 10″ Lift – 20″ Min. Width or Depth
- 12″ Lift – 22″ Min. Width or Depth
- 16″ Lift – 26″ Min. Width or Depth
- Electric Motor Hydraulic System:
- Minimum Top/Unit Widths (to Accommodate Hydraulic System):
- “B” – DEPTH (Front-to-Back) 30″min., 36″, & 48″
- “C” – HEIGHT Minimum Starting Height – Varies (Levelers/Casters):
- 6″ Lift System – 22″/28″ Min. Start Height
- 8″ Lift System – 24″/30″ Min. Start Height
- 10″ Lift System – 26″/32″ Min. Start Height
- 12″ Lift System – 28″/34″ Min. Start Height
- 16″ Lift System – 30″/36″ Min. Start Height
- 20″ Lift System – 32″/38″ Min. Start Height
FILL INFORMATION BELOW & CLICK "…CART" BUTTON AT BOTTOM
NOTE: * = Required