– Factory – Direct / Workbench Manufacturer –
Table Model A-107P-SS-CLG – Stainless Steel Workbench w/ Center Legs & Hydraulic Lift
– Stainless Steel Adjustable Height Table…
- Standard Sizes (To be Entered Below):
- We are the manufacturer…
- Feel free to specify your custom dimension below or choose from the following:
- “A” WIDTH – 48″, 60″, 72″, 96″, 120″ & 144″ Width (Right-to-Left)
- Visit our Large Table page for more sizes…
- Minimum Top/Unit Width & Depth (Required to Accommodate Hydraulic System):
- Electric Motor Hydraulic System:
- 6″ Lift – 28″ Min. Width
- 8″ Lift – 30″ Min. Width
- 10″ Lift – 32″ Min. Width
- 12″ Lift – 34″ Min. Width
- 16″ Lift – 38″ Min. Width
- Manual Crank Hydraulic System (Min Depth if Hand Crank located at front of Unit):
- NOTE: Hand Crank folds beneath work surface…
- 6″ Lift – 15″ Min. Width or Depth
- 8″ Lift – 17″ Min. Width or Depth
- 10″ Lift – 20″ Min. Width or Depth
- 12″ Lift – 22″ Min. Width or Depth
- 16″ Lift – 26″ Min. Width or Depth
- Electric Motor Hydraulic System:
- “B” DEPTH – 30″ & 36″ Depth (Front-to-Back)
- “C” HEIGHT – 30″ (Sitting “Desk” Height), 34″ (ADA/Accessible Height), 36″ (Standing Tasks)
- Minimum Heights with Levelers or Offset Casters (Subtract 4.75″ for Full-Time Caster Option):
- 6″ Lift – 16″ Min. Height
- 8″ Lift – 18″ Min. Height
- 10″ Lift – 20″ Min. Height
- 12″ Lift – 22″ Min. Height
- 16″ Lift – 26″ Min. Height
- 20″ Lift – 30″ Min. Height
- Minimum Heights with Levelers or Offset Casters (Subtract 4.75″ for Full-Time Caster Option):
This Unit shown with Optional Solid Surface Top and Optional Full Lower Shelf…
Center Leg Lift Table Features…
- More Costly than our Typical Carbon Steel Frame Construction…
- Ergonomic Table Height Adjustability (Options)
- Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
- Hand Crank is mounted below work surface (Front or Side)
- Switch for Electric Motor Option Unit can be positioned anywhere on the unit…
- 1,000 pound capacity lift system – 4 Leg Unit (Less Weight of Unit)
- Optional 1,500 pound capacity lift system available w/ electric motor – 4 & 6 Leg Unit (Less Weight of Unit)
- Optional 2,000 & 3,000 pound capacity lift system options available w/ electric motor – 8 Leg Unit (Less Weight of Unit)
- – Non-Toxic, Food-Grade Hydraulic Fluid for above systems…
- UL approved – Lift Systems with Electric Motors are UL listed (Required for Units w/ Electrical Components).
- CSA approved – Lift Systems with Electric Motors are CSA Certified (Required for Units w/ Electrical Components).
- Manually-Adjusted Height Option w/ Leg Pins – See Table Model A-109P-PIN
- Hydraulic-Assisted Height Adjustment w/ Electric Motor or Hand Crank
- Durable Stainless Steel Frame Construction w/ Lower Crossmember (Can be used as a footrest)
- Welded Tubular Steel Frame Connections
- Type 304 Stainless Steel Construction
- Type 316 Stainless Steel Construction available as option – Used in highly corrosive environments – More Expensive $$$
- Other Styles Available – See Our Stainless Steel Tables page…
- Also See Our Adjustable Height Tables page…
- Also See Our Laboratory Tables page…
- Adjustable Leveling Feet. Casters available as option – See below…
- Many Top Options to Choose From, Including Plastic Laminate, Chemical Resistant, ESD / Static-Control, Solid Surface, Solid Wood (Butcher Block), Stainless Steel, and More…
- Designed for Many Applications:
- General Use…
- Food Preparation
- Cleanrooms…
This model is part of the RDM Industrial Workbenches standard models.
FILL INFORMATION BELOW & CLICK "…CART" BUTTON AT BOTTOM
NOTE: * = Required